Presence of an Uninterruptible Power Supply (UPS): Difference between revisions
m (r2.7.2) (robot Adding: zh:不间断电源 (UPS) 的设置) |
m (cleaned up source: table format, etc ...) |
||
| Line 1: | Line 1: | ||
{{ | {{Menu_MV_and_LV_architecture_selection_guide}} | ||
<br> | <br> | ||
The electrical power from a UPS is supplied from a storage unit: batteries or inertia wheel. This system allows us to avoid any power failure. The back-up time of the system is limited: from several minutes to several hours.<br>The simultaneous presence of a back-up generator and a UPS unit is used for permanently supply loads for which no failure is acceptable ('''Fig. D17'''). The back-up time of the battery or the inertia wheel must be compatible with the maximum time for the generator to start up and be brought on-line.<br>A UPS unit is also used for supply power to loads that are sensitive to disturbances (generating a “clean” voltage that is independent of the network).<br>Main characteristics to be considered for implementing a UPS: | The electrical power from a UPS is supplied from a storage unit: batteries or inertia wheel. This system allows us to avoid any power failure. The back-up time of the system is limited: from several minutes to several hours.<br>The simultaneous presence of a back-up generator and a UPS unit is used for permanently supply loads for which no failure is acceptable ('''Fig. D17'''). The back-up time of the battery or the inertia wheel must be compatible with the maximum time for the generator to start up and be brought on-line.<br>A UPS unit is also used for supply power to loads that are sensitive to disturbances (generating a “clean” voltage that is independent of the network).<br>Main characteristics to be considered for implementing a UPS: | ||
| Line 10: | Line 10: | ||
---- | ---- | ||
[[File:FigD17.jpg|none]] | |||
'''''Fig. D17:''' Example of connection for a UPS'' | |||
[[ru:Использование источников бесперебойного питания (ИБП)]] | [[ru:Использование источников бесперебойного питания (ИБП)]] | ||
[[zh:不间断电源 (UPS) 的设置]] | [[zh:不间断电源 (UPS) 的设置]] | ||
Revision as of 13:10, 15 November 2013
The electrical power from a UPS is supplied from a storage unit: batteries or inertia wheel. This system allows us to avoid any power failure. The back-up time of the system is limited: from several minutes to several hours.
The simultaneous presence of a back-up generator and a UPS unit is used for permanently supply loads for which no failure is acceptable (Fig. D17). The back-up time of the battery or the inertia wheel must be compatible with the maximum time for the generator to start up and be brought on-line.
A UPS unit is also used for supply power to loads that are sensitive to disturbances (generating a “clean” voltage that is independent of the network).
Main characteristics to be considered for implementing a UPS:
- Sensitivity of loads to power interruptions,
- Sensitivity of loads to disturbances.
The presence of a UPS unit is essential if and only if no failure is acceptable.
Fig. D17: Example of connection for a UPS
ru:Использование источников бесперебойного питания (ИБП) zh:不间断电源 (UPS) 的设置
