LV switchgear: functions and selection: Difference between revisions

From Electrical Installation Guide
No edit summary
No edit summary
Line 1: Line 1:
{{Menu Index}} __NOTOC__  
{{Menu Index}} __NOTOC__  


== [[General Contents |General Contents ]] ==
== [[The basic functions of LV switchgear|The basic functions of LV switchgear]] ==


==== Methodology and definition  ====
==== Electrical protection ====


==== Overcurrent protection principles ====
==== Isolation ====


==== Practical values for a protective scheme ====
==== Switchgear control ====


==== Location of protective devices  ====
== [[The switchgear |The switchgear]] ==


==== Conductors in parallel  ====
==== Elementary switching devices ====


== [[Practical method for determining the smallest allowable cross-sectional area of circuit conductors|Practical method for determining the smallest allowable cross-sectional area of circuit conductors]] ==
==== Combined switchgear elements ====


==== General  ====
== [[Choice of switchgear |Choice of switchgear]] ==


==== General method for cables ====
==== Tabulated functional capabilities ====


==== Recommended simplified approach for cables  ====
==== Switchgear selection ====


==== Busbar trunking systems  ====
== [[Circuit-breaker|Circuit-breaker]] ==


== [[Determination of voltage drop|Determination of voltage drop]]  ==
==== Standards and description ====


==== Maximum voltage drop limit  ====
==== Fundamental characteristics of a circuit-breaker ====


==== Calculation of voltage drop in steady load conditions ====
==== Other characteristics of a circuit-breaker ====


== [[Short-circuit current|Short-circuit current]] ==
==== Selection of a circuit-breaker ====


==== Short-circuit current at the secondary terminals of a MV/LV distribution transformer ====
==== Coordination between circuit-breakers ====


==== 3-phase short-circuit current (Isc) at any point within a LV installation  ====
==== Discrimination MV/LV in a consumer’s substation ====
 
==== Isc at the receiving end of a feeder in terms of the Isc at its sending end  ====
 
==== Short-circuit current supplied by an alternator or an inverter  ====
 
== [[Particular cases of short-circuit current|Particular cases of short-circuit current]]  ==
 
==== Calculation of minimum levels of short-circuit current  ====
 
==== Verification of the withstand capabilities of cables under short-circuit conditions  ====
 
== [[Protective earthing conductor|Protective earthing conductor]]  ==
 
==== Connection and choice  ====
 
==== Conductor sizing  ====
 
==== Protective conductor between MV/LV transformer and the main general distribution board (MGDB)  ====
 
==== Equipotential conductor  ====
 
== [[The neutral conductor|The neutral conductor]]  ==
 
==== Sizing the neutral conductor ====
 
==== Protection of the neutral conductor  ====
 
==== Breaking of the neutral conductor  ====
 
==== Isolation of the neutral conductor  ====
 
== [[Worked example of cable calculation|Worked example of cable calculation ]]<br> ==

Revision as of 05:18, 3 February 2010

Template:Menu Index

The basic functions of LV switchgear

Electrical protection

Isolation

Switchgear control

The switchgear

Elementary switching devices

Combined switchgear elements

Choice of switchgear

Tabulated functional capabilities

Switchgear selection

Circuit-breaker

Standards and description

Fundamental characteristics of a circuit-breaker

Other characteristics of a circuit-breaker

Selection of a circuit-breaker

Coordination between circuit-breakers

Discrimination MV/LV in a consumer’s substation

Share