Direct and indirect contact: Difference between revisions
m (1 revision: no page modification, previous revision = imported ch.F pages cleaned-up) |
CleanUp2016 (talk | contribs) (Cleanup_2016) |
||
| Line 1: | Line 1: | ||
{{Menu_Protection_against_electric_shocks}} | {{Menu_Protection_against_electric_shocks}} | ||
__TOC__ | __TOC__ | ||
== Direct contact == | |||
{{Highlightbox| | {{Highlightbox| | ||
Two measures of protection against direct contact hazards are often required, since, in practice, the first measure may not be infallible | Two measures of protection against direct contact hazards are often required, since, in practice, the first measure may not be infallible}} | ||
}} | |||
A direct contact refers to a person coming into contact with a conductor which is live in normal circumstances (see {{FigRef|F2}}). | |||
IEC 61140 standard has renamed “protection against direct contact” with the term “basic protection”. The former name is at least kept for information. | |||
{{FigImage|DB422221_EN|svg|F2|Direct contact}} | |||
== Indirect contact == | |||
{{Highlightbox| | {{Highlightbox| | ||
| Line 19: | Line 20: | ||
*Direct contact | *Direct contact | ||
*Indirect contact | *Indirect contact | ||
and corresponding protective measures}} | |||
}} | |||
An indirect contact refers to a person coming into contact with an exposed-conductive-part which is not normally alive, but has become alive accidentally (due to insulation failure or some other cause). | |||
The fault current raise the exposed-conductive-part to a voltage liable to be hazardous which could be at the origin of a touch current through a person coming into contact with this exposed-conductive-part (see {{FigRef|F3}}). | |||
IEC 61140 standard has renamed “protection against indirect contact” with the term “fault protection”. The former name is at least kept for information. | |||
{{FigImage|DB422222_EN|svg|F3|Indirect contact}} | |||
[[ru:Прямое и косвенное прикосновения]] | [[ru:Прямое и косвенное прикосновения]] | ||
[[zh:直接接触和间接接触]] | [[zh:直接接触和间接接触]] | ||
Revision as of 22:50, 24 November 2016
Direct contact
Two measures of protection against direct contact hazards are often required, since, in practice, the first measure may not be infallible
A direct contact refers to a person coming into contact with a conductor which is live in normal circumstances (see Fig. F2).
IEC 61140 standard has renamed “protection against direct contact” with the term “basic protection”. The former name is at least kept for information.
Indirect contact
Standards and regulations distinguish two kinds of dangerous contact,
- Direct contact
- Indirect contact
and corresponding protective measures
An indirect contact refers to a person coming into contact with an exposed-conductive-part which is not normally alive, but has become alive accidentally (due to insulation failure or some other cause).
The fault current raise the exposed-conductive-part to a voltage liable to be hazardous which could be at the origin of a touch current through a person coming into contact with this exposed-conductive-part (see Fig. F3).
IEC 61140 standard has renamed “protection against indirect contact” with the term “fault protection”. The former name is at least kept for information.
