Presence of an Uninterruptible Power Supply (UPS): Difference between revisions
(Text modified (guide 2015)) |
(Images added (svg) as per guide 2016) |
||
| Line 16: | Line 16: | ||
---- | ---- | ||
[[File: | [[File:DB422133_EN.svg|none]] | ||
'''''Fig. D19:''''' ''Example of connection for a UPS'' | '''''Fig. D19:''''' ''Example of connection for a UPS'' | ||
[[ru:Использование источников бесперебойного питания (ИБП)]] | [[ru:Использование источников бесперебойного питания (ИБП)]] | ||
[[zh:不间断电源 (UPS) 的设置]] | [[zh:不间断电源 (UPS) 的设置]] | ||
Revision as of 07:59, 15 July 2016
The electrical power from a UPS is supplied from a storage unit: batteries or inertia wheel. This system prevent any power failure. The back-up time of the system is limited: from several minutes to several hours.
The simultaneous presence of a back-up generator and a UPS unit is used for permanently supply loads for which no failure is acceptable (Fig. D19). The back-up time of the battery must be compatible with the maximum time for the generator to start up and take over the load supply.
A UPS unit is also used to supply loads that are sensitive to power quality (generating a “clean” voltage that is independent of the network).
Main characteristics to be considered for implementing a UPS:
- Sensitivity of loads to power interruptions (see § 3.9 for definition),
- Sensitivity of loads to disturbances (see § 3.10 for definition).
The presence of a UPS unit is essential if and only if no failure is acceptable.
Fig. D19: Example of connection for a UPS
ru:Использование источников бесперебойного питания (ИБП) zh:不间断电源 (UPS) 的设置
