Talk:WIKI-EIG/Archive 1: Difference between revisions
From Electrical Installation Guide
(→Regarding Slip Power Recovery System: new section) |
(Wikitext talk to Structured Discussions conversion) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
{{Archive for converted wikitext talk page|from=Talk:WIKI-EIG|date=2019-12-18}} | |||
what is the reason for 11 KV,(500 KVA transformer) 350 MVA Breaking capacity VCB bush(cracks)to break down often. The DP structure DO fuse also breaks down when this happen. what is the remedy for it? | what is the reason for 11 KV,(500 KVA transformer) 350 MVA Breaking capacity VCB bush(cracks)to break down often. The DP structure DO fuse also breaks down when this happen. what is the remedy for it? | ||
The HT fuse used is 30 A (11KV) in the DP structure. | The HT fuse used is 30 A (11KV) in the DP structure. | ||
Latest revision as of 13:24, 18 December 2019
This page is an archive. Do not edit the contents of this page. Please direct any additional comments to the current talk page.
what is the reason for 11 KV,(500 KVA transformer) 350 MVA Breaking capacity VCB bush(cracks)to break down often. The DP structure DO fuse also breaks down when this happen. what is the remedy for it? The HT fuse used is 30 A (11KV) in the DP structure.
karthik
- Can you please provide more details about your question? It is not quite clear... Mssudeep fr 12:57, 9 November 2010 (UTC)
Regarding Slip Power Recovery System
In SPRS we use converter and inverter assembly to control the speed of the induction motor and in this process the power is fed back into the bus.
Can someone brief technically how the speed is controlled??
