The components of a SPD: Difference between revisions

From Electrical Installation Guide
VisualWikitext
m (1 revision)
m (1 revision imported: Migrated pages - removed CN links)
 
(16 intermediate revisions by 6 users not shown)
Line 1: Line 1:
{{Menu_Overvoltage_protection}}
{{Menu_Overvoltage_protection}}
The SPD chiefly consists of (see {{FigRef|J50}}):


__TOC__
'''1)''' one or more nonlinear components: the live part (varistor, gas discharge tube, etc.);


The SPD chiefly consists of (see '''Fig. J48'''):<br>1)&nbsp; one or more nonlinear components: the live part (varistor, gas discharge tube, etc.);<br>2)&nbsp; a thermal protective device (internal disconnector) which protects it from thermal runaway at end of life (SPD with varistor);<br>3)&nbsp; an indicator which indicates end of life of the SPD;<br>Some SPDs allow remote reporting of this indication;<br>4)&nbsp; an external SCPD which provides protection against short circuits (this device can be integrated into the SPD).
'''2)''' a thermal protective device (internal disconnector) which protects it from thermal runaway at end of life (SPD with varistor);


'''3)''' an indicator which indicates end of life of the SPD;
: Some SPDs allow remote reporting of this indication;


[[File:Fig J45.jpg|none]]
'''4)''' an external SCPD which provides protection against short circuits (this device can be integrated into the SPD).
'''''Fig. J48:''' Diagram of a SPD''


{{FigImage|DB422510|svg|J50|Diagram of a SPD}}


 
== Technology of the live part ==
== Technology of the live part''<br>'' ==


Several technologies are available to implement the live part. They each have advantages and disadvantages:  
Several technologies are available to implement the live part. They each have advantages and disadvantages:  
*Zener diodes;  
*Zener diodes;  
*The gas discharge tube (controlled or not controlled);  
*The gas discharge tube (controlled or not controlled);  
Line 21: Line 22:
The table below shows the characteristics and the arrangements of 3 commonly used technologies.  
The table below shows the characteristics and the arrangements of 3 commonly used technologies.  


----
{{tb-start|id=Tab1302|num=J51|title=Summary performance table|cols=5}}
 
{| class="wikitable"
<br>
 
{| class="wikitable" style="width: 795px; height: 157px" width="795"
|-
|-
! Component  
! Component  
! Gas Discharge Tube (GDT)  
! Gas Discharge Tube (GDT)  
! Encapsulated spark gap  
! Encapsulated spark gap  
! Zinc oxide varistor&nbsp;<br>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
! Zinc oxide varistor
! GDT and varistor in series&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
! GDT and varistor in series
! Encapsulated spark gap and varistor in parallel
! Encapsulated spark gap and varistor in parallel
|-
|-
| {{Table_HC2}} | '''Characteristics'''  
| {{tb-HC2}} | '''Characteristics'''  
! &nbsp;
!  
! &nbsp;
!  
! &nbsp;
!  
! &nbsp;
!  
! &nbsp;
!  
|-
|-
| {{Table_HC2}} | &nbsp;
| {{tb-HC2}} |
| valign="middle" | [[File:Fig J46a.jpg|center|59x128px]]&nbsp;
| valign="middle" | [[File:DB422511.png]]
| valign="middle" | [[File:Fig J46b.jpg|center|59x123px]]&nbsp;
| valign="middle" | [[File:DB422512.png]]
| [[File:Fig J46c.jpg|center]]  
| [[File:DB422513.png]]  
| [[File:Fig J46d.jpg|center|39x139px]]  
| [[File:DB422514.png]]  
| [[File:Fig J46e.jpg|center|146x150px]]
| [[File:DB422515.png]]
|-
|-
| {{Table_HC2}} | '''Operating mode'''  
| {{tb-HC2}} | '''Operating mode'''  
| Voltage switching  
| Voltage switching  
| Voltage switching  
| Voltage switching  
Line 55: Line 53:
| Voltage-switching and -limiting in parallel
| Voltage-switching and -limiting in parallel
|-
|-
| {{Table_HC2}} | '''Operating&nbsp;curves'''  
| {{tb-HC2}} | '''Operating curves'''  
| valign="middle" align="center" colspan="2" | [[File:Fig J46f.jpg|center]]  
| valign="middle" align="center" colspan="2" | [[File:DB422516.png]]
| valign="middle" align="center" | [[File:Fig J46g.jpg|none]]
| valign="middle" align="center" | [[File:DB422517.png]]
| {{Table_HC2}} | &nbsp;
| {{tb-HC2}} |
| {{Table_HC2}} | &nbsp;
| {{tb-HC2}} |
|-
|-
| {{Table_HC2}} | '''Application'''  
| {{tb-HC2}} | '''Application'''  
|  
|  
*Telecom network  
*Telecom network  
Line 73: Line 71:
| LV network
| LV network
|-
|-
| {{Table_HC2}} | '''SPD Type'''  
| {{tb-HC2}} | '''SPD Type'''  
| Type 2  
| Type 2  
| Type 1  
| Type 1  
| Type 1 ou Type 2  
| Type 1 or Type 2  
| Type 1+ Type 2  
| Type 1+ Type 2  
| Type 1+ Type 2
| Type 1+ Type 2
|}
|}


'''''Fig. J49:''' Summary performance table''
'''Note:''' Two technologies can be installed in the same SPD (see {{FigRef|J52}})
 
----
 
Note: Two technologies can be installed in the same SPD (see '''Fig. J50''')&nbsp;
 
----
 
[[File:Fig J47.jpg|none]]
'''''Fig. J50:''' The Schneider Electric brand PRD SPD incorporates a gas discharge tube between neutral and earth and varistors between phase and neutral''
 
----


[[zh:浪涌保护器的部件]]
{{Gallery|J52|The Schneider Electric brand iPRD SPD incorporates a gas discharge tube between neutral and earth and varistors between phase and neutral||
|PB116777.jpg||
|DB422518.svg||}}

Latest revision as of 17:50, 20 December 2019

The SPD chiefly consists of (see Fig. J50):

1) one or more nonlinear components: the live part (varistor, gas discharge tube, etc.);

2) a thermal protective device (internal disconnector) which protects it from thermal runaway at end of life (SPD with varistor);

3) an indicator which indicates end of life of the SPD;

Some SPDs allow remote reporting of this indication;

4) an external SCPD which provides protection against short circuits (this device can be integrated into the SPD).

Fig. J50 – Diagram of a SPD

Technology of the live part

Several technologies are available to implement the live part. They each have advantages and disadvantages:

  • Zener diodes;
  • The gas discharge tube (controlled or not controlled);
  • The varistor (zinc oxide varistor).

The table below shows the characteristics and the arrangements of 3 commonly used technologies.

Fig. J51 – Summary performance table
Component Gas Discharge Tube (GDT) Encapsulated spark gap Zinc oxide varistor GDT and varistor in series Encapsulated spark gap and varistor in parallel
Characteristics
DB422511.png DB422512.png DB422513.png DB422514.png DB422515.png
Operating mode Voltage switching Voltage switching Voltage limiting Voltage-switching and -limiting in series Voltage-switching and -limiting in parallel
Operating curves DB422516.png DB422517.png
Application
  • Telecom network
  • LV network

(associated with varistor)

LV network LV network LV network LV network
SPD Type Type 2 Type 1 Type 1 or Type 2 Type 1+ Type 2 Type 1+ Type 2

Note: Two technologies can be installed in the same SPD (see Fig. J52)

Fig. J52 – The Schneider Electric brand iPRD SPD incorporates a gas discharge tube between neutral and earth and varistors between phase and neutral
  • PB116777.jpg
  • DB422518.svg
Retrieved from "http://www.electrical-installation.org/enw/index.php?title=The_components_of_a_SPD&oldid=26742"
Share
Add a comment

About this wiki

The Electrical Installation Guide is now available here as a wiki (Electrical Installation Wiki). This wiki is a collaborative platform, brought to you by Schneider Electric: our experts are continuously improving its content, as they were doing for the guide. Collaboration to this wiki is also open to all.

Help

Navigation