Presence of an Uninterruptible Power Supply (UPS): Difference between revisions
m (r2.7.2) (robot Adding: ru:Использование источников бесперебойного питания (ИБП)) |
m (Text replacement - "\[\[ru:[^]]*\]\][ \r\n]*" to "") |
||
| (16 intermediate revisions by 6 users not shown) | |||
| Line 1: | Line 1: | ||
{{ | {{Menu_MV_and_LV_architecture_selection_guide}} | ||
The electrical power from a UPS is supplied from a storage unit: batteries or inertia wheel. This system prevent any power failure. The back-up time of the system is limited: from several minutes to several hours. | |||
The electrical power from a UPS is supplied from a storage unit: batteries or inertia wheel. This system | |||
The simultaneous presence of a back-up generator and a UPS unit is used for permanently supply loads for which no failure is acceptable ({{FigRef|D19}}). The back-up time of the battery must be compatible with the maximum time for the generator to start up and take over the load supply. | |||
A UPS unit is also used to supply loads that are sensitive to power quality (generating a “clean” voltage that is independent of the network). | |||
Main characteristics to be considered for implementing a UPS: | |||
* Sensitivity of loads to power interruptions (see [[Electrical installation characteristics|Voltage Interruption Sensitivity]] for definition), | |||
* Sensitivity of loads to disturbances (see [[Electrical installation characteristics|Disturbance sensitivity]] for definition). | |||
The presence of a UPS unit is essential if and only if no failure is acceptable. | |||
{{FigImage|DB422133_EN|svg|D19|Example of connection for a UPS}} | |||
Latest revision as of 09:48, 22 June 2022
The electrical power from a UPS is supplied from a storage unit: batteries or inertia wheel. This system prevent any power failure. The back-up time of the system is limited: from several minutes to several hours.
The simultaneous presence of a back-up generator and a UPS unit is used for permanently supply loads for which no failure is acceptable (Fig. D19). The back-up time of the battery must be compatible with the maximum time for the generator to start up and take over the load supply.
A UPS unit is also used to supply loads that are sensitive to power quality (generating a “clean” voltage that is independent of the network).
Main characteristics to be considered for implementing a UPS:
- Sensitivity of loads to power interruptions (see Voltage Interruption Sensitivity for definition),
- Sensitivity of loads to disturbances (see Disturbance sensitivity for definition).
The presence of a UPS unit is essential if and only if no failure is acceptable.
