List of external influences: Difference between revisions
From Electrical Installation Guide
m (1 revision: no page modification, previous revision = imported ch.E pages cleaned-up)) |
CleanUp2016 (talk | contribs) (Cleanup_2016) |
||
Line 1: | Line 1: | ||
{{Menu_LV_Distribution}} | {{Menu_LV_Distribution}} | ||
{{FigureRef|E60}} below is from '''IEC 60364-5-51''', which should be referred to if further details are required. | {{FigureRef|E60}} below is from '''IEC 60364-5-51''', which should be referred to if further details are required. | ||
{{TableStart|Tab1132|5col}} | |||
{| | |||
|- | |- | ||
! colspan="2" | Code | ! colspan="2" | Code | ||
! colspan="2" | External influences | ! colspan="2" | External influences | ||
! Characteristics required for equipment | ! colspan="4" | Characteristics required for equipment | ||
|- | |- | ||
! colspan=" | ! colspan="8" | A - Environment | ||
|- | |- | ||
| '''AA''' | |||
| | | colspan="7" | '''Ambient temperature (°C)''' | ||
|- | |- | ||
| | | | ||
| Low | | Low | ||
| | | colspan="2" | High | ||
| rowspan="4" colspan="4" | Specially designed equipment or appropriate arrangements | |||
| rowspan="4" | Specially designed equipment or appropriate arrangements | |||
|- | |- | ||
| AA1 | | AA1 | ||
| - 60 °C | | - 60 °C | ||
| + 5 °C | | colspan="2" | + 5 °C | ||
|- | |- | ||
| AA2 | | AA2 | ||
| - 40 °C | | - 40 °C | ||
| + 5 °C | | colspan="2" | + 5 °C | ||
|- | |- | ||
| AA3 | | AA3 | ||
| - 25 °C | | - 25 °C | ||
| + 5 °C | | colspan="2" | + 5 °C | ||
|- | |- | ||
| AA4 | | AA4 | ||
| - 5° C | | - 5° C | ||
| + 40 °C | | colspan="2" | + 40 °C | ||
| | | colspan="4" | Normal (special precautions in certain cases) | ||
| Normal (special precautions in certain cases) | |||
|- | |- | ||
| AA5 | | AA5 | ||
| + 5 °C | | + 5 °C | ||
| + 40 °C | | colspan="2" | + 40 °C | ||
| | | colspan="4" | Normal | ||
| Normal | |||
|- | |- | ||
| AA6 | | AA6 | ||
| + 5 °C | | + 5 °C | ||
| + 60 °C | | colspan="2" | + 60 °C | ||
| rowspan="3" colspan="4" | Specially designed equipment or <br> | |||
| rowspan="3" | Specially designed equipment or <br>appropriate arrangements | appropriate arrangements | ||
|- | |- | ||
| AA7 | | AA7 | ||
| - 25 °C | | - 25 °C | ||
| + 55 °C | | colspan="2" | + 55 °C | ||
|- | |- | ||
| AA8 | | AA8 | ||
| - 50° C | | - 50° C | ||
| + 40 °C | | colspan="2" | + 40 °C | ||
|- | |- | ||
| '''AB''' | |||
| | | colspan="7" | '''Atmospheric humidity''' | ||
|- | |- | ||
| | | | ||
Line 79: | Line 65: | ||
|- | |- | ||
| | | | ||
| | | style="width: 65px" |Low | ||
| | | style="width: 65px" |High | ||
| | | style="width: 65px" |Low | ||
| | | style="width: 65px" |High | ||
| | | style="width: 65px" |Low | ||
| | | style="width: 65px" | High | ||
| | | | ||
|- | |- | ||
Line 154: | Line 140: | ||
| 0.04 | | 0.04 | ||
| 36 | | 36 | ||
|- | |- | ||
| '''AC''' | |||
| | | colspan="7" | '''Altitude''' | ||
|- | |- | ||
| AC1 | | AC1 | ||
| | | colspan="2" | ≤ 2000 m | ||
| | | colspan="5" | Normal | ||
| Normal | |||
|- | |- | ||
| AC2 | | AC2 | ||
| | | colspan="2" | > 2000 m | ||
| | | colspan="5" | May necessitate precaution (derating factors) | ||
| May necessitate precaution (derating factors) | |||
|- | |- | ||
| '''AD''' | |||
| | | colspan="7" | '''Presence of water''' | ||
|- | |- | ||
| AD1 | | AD1 | ||
| Negligible | | Negligible | ||
| Probability of presence of water is negligible | | Probability of presence of water is negligible | ||
| IPX0 | | colspan="5" | IPX0 | ||
|- | |- | ||
| AD2 | | AD2 | ||
| Free falling drops | | Free falling drops | ||
| Probability of presence of water is negligible | | Probability of presence of water is negligible | ||
| IPX1 or IPX2 | | colspan="5" | IPX1 or IPX2 | ||
|- | |- | ||
| AD3 | | AD3 | ||
| Sprays | | Sprays | ||
| Possibility of water falling as a spray at an angle up to 60° from the vertical | | Possibility of water falling as a spray at an angle up to 60° from the vertical | ||
| IPX3 | | colspan="5" | IPX3 | ||
|- | |- | ||
| AD4 | | AD4 | ||
| Splashes | | Splashes | ||
| Possibility of splashes from any direction | | Possibility of splashes from any direction | ||
| IPX4 | | colspan="5" | IPX4 | ||
|- | |- | ||
| AD5 | | AD5 | ||
| Jets | | Jets | ||
| Possibility of jets of water from any direction | | Possibility of jets of water from any direction | ||
| IPX5 | | colspan="5" | IPX5 | ||
|- | |- | ||
| AD6 | | AD6 | ||
| Waves | | Waves | ||
| Possibility of water waves (seashore locations) | | Possibility of water waves (seashore locations) | ||
| IPX6 | | colspan="5" | IPX6 | ||
|- | |- | ||
| AD7 | | AD7 | ||
| Immersion | | Immersion | ||
| Possibility of intermittent partial or total covering by water | | Possibility of intermittent partial or total covering by water | ||
| IPX7 | | colspan="5" | IPX7 | ||
|- | |- | ||
| AD8 | | AD8 | ||
| Submersion | | Submersion | ||
| Equipment is permanently and totally covered | | Equipment is permanently and totally covered | ||
| | | colspan="5" | IPX8 | ||
|- | |- | ||
| '''AE''' | |||
| | | colspan="7" | '''Presence of foreign solid bodies or dust''' | ||
|- | |- | ||
| | | | ||
Line 224: | Line 202: | ||
| Smallest dimension | | Smallest dimension | ||
| Example | | Example | ||
| | | colspan="4" | | ||
|- | |- | ||
| AE1 | | AE1 | ||
Line 230: | Line 208: | ||
| | | | ||
| | | | ||
| IP0X | | colspan="4" | IP0X | ||
|- | |- | ||
| AE2 | | AE2 | ||
Line 236: | Line 214: | ||
| 2.5 mm | | 2.5 mm | ||
| Tools | | Tools | ||
| IP3X | | colspan="4" | IP3X | ||
|- | |- | ||
| AE3 | | AE3 | ||
Line 242: | Line 220: | ||
| 1 mm | | 1 mm | ||
| Wire | | Wire | ||
| IP4X | | colspan="4" | IP4X | ||
|- | |- | ||
| AE4 | | AE4 | ||
Line 248: | Line 226: | ||
| | | | ||
| | | | ||
| rowspan="2" | IP5X if dust penetration is not harmful to functioning | | rowspan="2" colspan="4" | IP5X if dust penetration is not harmful to functioning | ||
IP6X if dust should not penetrate | |||
|- | |- | ||
| AE5 | | AE5 | ||
Line 259: | Line 238: | ||
| | | | ||
| | | | ||
| | | colspan="4" | IP6X | ||
|- | |- | ||
| '''AF''' | |||
| | | colspan="7" | '''Presence of corrosive or polluting substances''' | ||
|- | |- | ||
| AF1 | | AF1 | ||
| Negligible | | colspan="2" | Negligible | ||
| | | colspan="5" | Normal | ||
| Normal | |||
|- | |- | ||
| AF2 | | AF2 | ||
| Atmospheric | | colspan="2" | Atmospheric | ||
| | | colspan="5" | According to the nature of the substance | ||
| According to the nature of the substance | |||
|- | |- | ||
| AF3 | | AF3 | ||
| Intermittent, accidental | | colspan="2" | Intermittent, accidental | ||
| | | colspan="5" | Protection against corrosion | ||
| Protection against corrosion | |||
|- | |- | ||
| AF4 | | AF4 | ||
| Continuous | | colspan="2" | Continuous | ||
| | | colspan="5" | Equipment specially designed | ||
| Equipment specially designed | |||
|- | |- | ||
| '''AG''' | |||
| | | colspan="7" | '''Mechanical shock''' | ||
|- | |- | ||
| AG1 | | AG1 | ||
| Low severity | | colspan="2" | Low severity | ||
| | | colspan="5" | Normal, e.g. household and similar equipment | ||
| Normal, e.g. household and similar equipment | |||
|- | |- | ||
| AG2 | | AG2 | ||
| Medium severity | | colspan="2" | Medium severity | ||
| | | colspan="5" | Standard industrial equipment, where applicable, or reinforced protection | ||
| Standard industrial equipment, where applicable, or reinforced protection | |||
|- | |- | ||
| AG3 | | AG3 | ||
| High severity | | colspan="2" | High severity | ||
| | | colspan="5" | Reinforced protection | ||
| Reinforced protection | |||
|- | |- | ||
| '''AH''' | |||
| | | colspan="7" | '''Vibrations''' | ||
|- | |- | ||
| AH1 | | AH1 | ||
| Low severity | | Low severity | ||
| Household or similar | | Household or similar | ||
| Normal | | colspan="5" | Normal | ||
|- | |- | ||
| AH2 | | AH2 | ||
| Medium severity | | Medium severity | ||
| Usual industrial conditions | | Usual industrial conditions | ||
| Specially designed equipment or special arrangements | | colspan="5" | Specially designed equipment or special arrangements | ||
|- | |- | ||
| AH3 | | AH3 | ||
| High severity | | High severity | ||
| Severe industrial conditions | | Severe industrial conditions | ||
| | | colspan="5" | | ||
|- | |- | ||
| '''AK''' | |||
| | | colspan="7" | '''Presence of flora and/or moulds growth''' | ||
|- | |- | ||
| AK1 | | AK1 | ||
| No hazard | | colspan="2" | No hazard | ||
| | | colspan="5" | Normal | ||
| Normal | |||
|- | |- | ||
| AK2 | | AK2 | ||
| Hazard | | colspan="2" | Hazard | ||
| | | colspan="5" | Special protection | ||
| Special protection | |||
|- | |- | ||
| '''AL''' | |||
| | | colspan="7" | '''Presence of fauna''' | ||
|- | |- | ||
| AL1 | | AL1 | ||
| No hazard | | colspan="2" | No hazard | ||
| | | colspan="5" | Normal | ||
| Normal | |||
|- | |- | ||
| AL2 | | AL2 | ||
| Hazard | | colspan="2" | Hazard | ||
| | | colspan="5" | Special protection | ||
| Special protection | |||
|- | |- | ||
| '''AM''' | |||
| | | colspan="7" | '''Electromagnetic, electrostatic or ionising influences / Low frequency electromagnetic phenomena / Harmonics''' | ||
|- | |- | ||
| AM1 | | AM1 | ||
| colspan="2" | Harmonics, interharmonics | | colspan="2" | Harmonics, interharmonics | ||
| rowspan="10" | Refer to applicable IEC standards | | rowspan="10" colspan="5" | Refer to applicable IEC standards | ||
|- | |- | ||
| AM2 | | AM2 | ||
Line 382: | Line 347: | ||
| AM21 | | AM21 | ||
| colspan="2" | Induced oscillatory voltages or currents | | colspan="2" | Induced oscillatory voltages or currents | ||
|- | |- | ||
| AM22 | | AM22 | ||
| Conducted unidirectional transients of the nanosecond time scale | | colspan="2" | Conducted unidirectional transients of the nanosecond time scale | ||
| Refer to applicable IEC standards | | rowspan="6" colspan="5" |Refer to applicable IEC standards | ||
|- | |- | ||
| AM23 | | AM23 | ||
| Conducted unidirectional transients of the microsecond to the millisecond time scale | | colspan="2" | Conducted unidirectional transients of the microsecond to the millisecond time scale | ||
|- | |- | ||
| AM24 | | AM24 | ||
| Conducted oscillatory transients | | colspan="2" | Conducted oscillatory transients | ||
|- | |- | ||
| AM25 | | AM25 | ||
| Radiated high frequency phenomena | | colspan="2" | Radiated high frequency phenomena | ||
|- | |- | ||
| AM31 | | AM31 | ||
| Electrostatic discharges | | colspan="2" | Electrostatic discharges | ||
|- | |- | ||
| AM41 | | AM41 | ||
| Ionisation | | colspan="2" | Ionisation | ||
|- | |- | ||
| '''AN''' | |||
| | | colspan="7" | '''Solar radiation''' | ||
|- | |- | ||
| AN1 | | AN1 | ||
| Low | | colspan="2" | Low | ||
| Normal | | colspan="5" |Normal | ||
|- | |- | ||
| AN2 | | AN2 | ||
| Medium | | colspan="2" | Medium | ||
| rowspan="2" | | | rowspan="2" colspan="5" | | ||
|- | |- | ||
| AN3 | | AN3 | ||
| | | colspan="2" | | ||
|- | |- | ||
| '''AP''' | |||
| | | colspan="7" | '''Seismic effect''' | ||
|- | |- | ||
| AP1 | | AP1 | ||
| Negligible | | colspan="2" | Negligible | ||
| Normal | | colspan="5" |Normal | ||
|- | |- | ||
| AP2 | | AP2 | ||
| Low severity | | colspan="2" | Low severity | ||
| rowspan="3" | | | rowspan="3" colspan="5" | | ||
|- | |- | ||
| AP3 | | AP3 | ||
| Medium severity | | colspan="2" | Medium severity | ||
|- | |- | ||
| AP4 | | AP4 | ||
| High severity | | colspan="2" | High severity | ||
|- | |- | ||
| '''AQ''' | |||
| | | colspan="7" | '''Lightning''' | ||
|- | |- | ||
| AQ1 | | AQ1 | ||
| Negligible | | colspan="2" | Negligible | ||
| Normal | | colspan="5" |Normal | ||
|- | |- | ||
| AQ2 | | AQ2 | ||
| Indirect exposure | | colspan="2" | Indirect exposure | ||
| rowspan="2" | | | rowspan="2" colspan="5" | | ||
|- | |- | ||
| AQ3 | | AQ3 | ||
| Direct exposure | | colspan="2" | Direct exposure | ||
|- | |- | ||
| '''AR''' | |||
| | | colspan="7" | '''Movement of air''' | ||
|- | |- | ||
| AR1 | | AR1 | ||
| Low | | colspan="2" | Low | ||
| Normal | | colspan="5" |Normal | ||
|- | |- | ||
| AR2 | | AR2 | ||
| Medium | | colspan="2" | Medium | ||
| rowspan="2" | | | rowspan="2" colspan="5" | | ||
|- | |- | ||
| AR3 | | AR3 | ||
| High | | colspan="2" | High | ||
|- | |- | ||
| '''AS''' | |||
| | | colspan="7" | '''Wind''' | ||
|- | |- | ||
| AS1 | | AS1 | ||
| Low | | colspan="2" | Low | ||
| Normal | | colspan="5" |Normal | ||
|- | |- | ||
| AS2 | | AS2 | ||
| Medium | | colspan="2" | Medium | ||
| rowspan="2" | | | rowspan="2" colspan="5" | | ||
|- | |- | ||
| AS3 | | AS3 | ||
| High | | colspan="2" | High | ||
|- | |- | ||
! colspan=" | ! colspan="8" | B - Utilization | ||
|- | |- | ||
| '''BA''' | |||
| | | colspan="7" | '''Capability of persons''' | ||
|- | |- | ||
| BA1 | | BA1 | ||
| Ordinary | | colspan="2" | Ordinary | ||
| Normal | | colspan="5" |Normal | ||
|- | |- | ||
| BA2 | | BA2 | ||
| Children | | colspan="2" | Children | ||
| rowspan="4" | | | rowspan="4" colspan="5" | | ||
|- | |- | ||
| BA3 | | BA3 | ||
| Handicapped | | colspan="2" | Handicapped | ||
|- | |- | ||
| BA4 | | BA4 | ||
| Instructed | | colspan="2" | Instructed | ||
|- | |- | ||
| BA5 | | BA5 | ||
| Skilled | | colspan="2" | Skilled | ||
|- | |- | ||
| '''BB''' | |||
| | | colspan="7" | '''Electrical resistance of human body (under consideration)''' | ||
|- | |- | ||
| '''BC''' | |||
| | | colspan="7" | '''Contact of persons with earth potential''' | ||
|- | |- | ||
| BC1 | | BC1 | ||
| None | | colspan="2" | None | ||
| Class of equipment according to IEC61140 | | colspan="5" |Class of equipment according to IEC61140 | ||
|- | |- | ||
| BC2 | | BC2 | ||
| Low | | colspan="2" | Low | ||
| rowspan="3" | | | rowspan="3" colspan="5" | | ||
|- | |- | ||
| BC3 | | BC3 | ||
| Frequent | | colspan="2" | Frequent | ||
|- | |- | ||
| BC4 | | BC4 | ||
| Continuous | | colspan="2" | Continuous | ||
|- | |- | ||
| '''BD''' | |||
| | | colspan="7" | '''Condition of evacuation in case of emergency''' | ||
|- | |- | ||
| BD1 | | BD1 | ||
| Low density / easy exit | | colspan="2" | Low density / easy exit | ||
| Normal | | colspan="5" |Normal | ||
|- | |- | ||
| BD2 | | BD2 | ||
| Low density / difficult exit | | colspan="2" | Low density / difficult exit | ||
| rowspan="3" | | | rowspan="3" colspan="5" | | ||
|- | |- | ||
| BD3 | | BD3 | ||
| High density / easy exit | | colspan="2" | High density / easy exit | ||
|- | |- | ||
| BD4 | | BD4 | ||
| High density / difficult exit | | colspan="2" | High density / difficult exit | ||
|- | |- | ||
| '''BE''' | |||
| | | colspan="7" | '''Nature of processed or stored materials''' | ||
|- | |- | ||
| BE1 | | BE1 | ||
| No significant risks | | colspan="2" | No significant risks | ||
| Normal | | colspan="5" |Normal | ||
|- | |- | ||
| BE2 | | BE2 | ||
| Fire risks | | colspan="2" | Fire risks | ||
| rowspan="3" | | | rowspan="3" colspan="5" | | ||
|- | |- | ||
| BE3 | | BE3 | ||
| Explosion risks | | colspan="2" | Explosion risks | ||
|- | |- | ||
| BE4 | | BE4 | ||
| Contamination risks | | colspan="2" | Contamination risks | ||
|- | |- | ||
! colspan=" | ! colspan="8" | C - Construction of building | ||
|- | |- | ||
| '''CA''' | |||
| | | colspan="7" | '''Construction materials''' | ||
|- | |- | ||
| CA1 | | CA1 | ||
| Non combustible | | colspan="2" | Non combustible | ||
| Normal | | colspan="5" |Normal | ||
|- | |- | ||
| CA2 | | CA2 | ||
| Combustible | | colspan="2" | Combustible | ||
| | | colspan="5" | | ||
|- | |- | ||
| '''CB''' | |||
| | | colspan="7" | '''Building design''' | ||
|- | |- | ||
| CB1 | | CB1 | ||
| Negligible risks | | colspan="2" | Negligible risks | ||
| Normal | | colspan="5" |Normal | ||
|- | |- | ||
| CB2 | | CB2 | ||
| Propagation of fire | | colspan="2" | Propagation of fire | ||
| rowspan="3" | | | rowspan="3" colspan="5" | | ||
|- | |- | ||
| CB3 | | CB3 | ||
| Movement | | colspan="2" | Movement | ||
|- | |- | ||
| CB4 | | CB4 | ||
| Flexible or unstable | | colspan="2" | Flexible or unstable | ||
| | |- | ||
{{TableEnd|Tab1132|E60|List of external influences (taken from Appendix A of IEC 60364-5-51) | |||
[[ru:Перечень внешних воздействий]] | [[ru:Перечень внешних воздействий]] | ||
[[zh:外部影响一览表]] | [[zh:外部影响一览表]] |
Revision as of 01:24, 24 November 2016
Figure E60 below is from IEC 60364-5-51, which should be referred to if further details are required.
Code | External influences | Characteristics required for equipment | |||||
---|---|---|---|---|---|---|---|
A - Environment | |||||||
AA | Ambient temperature (°C) | ||||||
Low | High | Specially designed equipment or appropriate arrangements | |||||
AA1 | - 60 °C | + 5 °C | |||||
AA2 | - 40 °C | + 5 °C | |||||
AA3 | - 25 °C | + 5 °C | |||||
AA4 | - 5° C | + 40 °C | Normal (special precautions in certain cases) | ||||
AA5 | + 5 °C | + 40 °C | Normal | ||||
AA6 | + 5 °C | + 60 °C | Specially designed equipment or appropriate arrangements | ||||
AA7 | - 25 °C | + 55 °C | |||||
AA8 | - 50° C | + 40 °C | |||||
AB | Atmospheric humidity | ||||||
Air temperature °C | Relative humidity | Absolute humidity g/m3 | |||||
Low | High | Low | High | Low | High | ||
AB1 | - 60 °C | + 5 °C | 3 | 100 | 0.003 | 7 | Appropriate arrangements shall be made |
AB2 | - 40 °C | + 5 °C | 10 | 100 | 0.1 | 7 | |
AB3 | - 25 °C | + 5 °C | 10 | 100 | 0.5 | 7 | |
AB4 | - 5° C | + 40 °C | 5 | 95 | 1 | 29 | Normal |
AB5 | + 5 °C | + 40 °C | 5 | 85 | 1 | 25 | Normal |
AB6 | + 5 °C | + 60 °C | 10 | 100 | 1 | 35 | Appropriate arrangements shall be made |
AB7 | - 25 °C | + 55 °C | 10 | 100 | 0.5 | 29 | |
AB8 | - 50 °C | + 40 | 15 | 100 | 0.04 | 36 | |
AC | Altitude | ||||||
AC1 | ≤ 2000 m | Normal | |||||
AC2 | > 2000 m | May necessitate precaution (derating factors) | |||||
AD | Presence of water | ||||||
AD1 | Negligible | Probability of presence of water is negligible | IPX0 | ||||
AD2 | Free falling drops | Probability of presence of water is negligible | IPX1 or IPX2 | ||||
AD3 | Sprays | Possibility of water falling as a spray at an angle up to 60° from the vertical | IPX3 | ||||
AD4 | Splashes | Possibility of splashes from any direction | IPX4 | ||||
AD5 | Jets | Possibility of jets of water from any direction | IPX5 | ||||
AD6 | Waves | Possibility of water waves (seashore locations) | IPX6 | ||||
AD7 | Immersion | Possibility of intermittent partial or total covering by water | IPX7 | ||||
AD8 | Submersion | Equipment is permanently and totally covered | IPX8 | ||||
AE | Presence of foreign solid bodies or dust | ||||||
Smallest dimension | Example | ||||||
AE1 | Negligible | IP0X | |||||
AE2 | Small objects | 2.5 mm | Tools | IP3X | |||
AE3 | Very small objects | 1 mm | Wire | IP4X | |||
AE4 | Light dust | IP5X if dust penetration is not harmful to functioning
IP6X if dust should not penetrate | |||||
AE5 | Moderate dust | ||||||
AE6 | Heavy dust | IP6X | |||||
AF | Presence of corrosive or polluting substances | ||||||
AF1 | Negligible | Normal | |||||
AF2 | Atmospheric | According to the nature of the substance | |||||
AF3 | Intermittent, accidental | Protection against corrosion | |||||
AF4 | Continuous | Equipment specially designed | |||||
AG | Mechanical shock | ||||||
AG1 | Low severity | Normal, e.g. household and similar equipment | |||||
AG2 | Medium severity | Standard industrial equipment, where applicable, or reinforced protection | |||||
AG3 | High severity | Reinforced protection | |||||
AH | Vibrations | ||||||
AH1 | Low severity | Household or similar | Normal | ||||
AH2 | Medium severity | Usual industrial conditions | Specially designed equipment or special arrangements | ||||
AH3 | High severity | Severe industrial conditions | |||||
AK | Presence of flora and/or moulds growth | ||||||
AK1 | No hazard | Normal | |||||
AK2 | Hazard | Special protection | |||||
AL | Presence of fauna | ||||||
AL1 | No hazard | Normal | |||||
AL2 | Hazard | Special protection | |||||
AM | Electromagnetic, electrostatic or ionising influences / Low frequency electromagnetic phenomena / Harmonics | ||||||
AM1 | Harmonics, interharmonics | Refer to applicable IEC standards | |||||
AM2 | Signalling voltage | ||||||
AM3 | Voltage amplitude variations | ||||||
AM4 | Voltage unbalance | ||||||
AM5 | Power frequency variations | ||||||
AM6 | Induced low-frequency voltages | ||||||
AM7 | Direct current in a.c. networks | ||||||
AM8 | Radiated magnetic fields | ||||||
AM9 | Electric field | ||||||
AM21 | Induced oscillatory voltages or currents | ||||||
AM22 | Conducted unidirectional transients of the nanosecond time scale | Refer to applicable IEC standards | |||||
AM23 | Conducted unidirectional transients of the microsecond to the millisecond time scale | ||||||
AM24 | Conducted oscillatory transients | ||||||
AM25 | Radiated high frequency phenomena | ||||||
AM31 | Electrostatic discharges | ||||||
AM41 | Ionisation | ||||||
AN | Solar radiation | ||||||
AN1 | Low | Normal | |||||
AN2 | Medium | ||||||
AN3 | |||||||
AP | Seismic effect | ||||||
AP1 | Negligible | Normal | |||||
AP2 | Low severity | ||||||
AP3 | Medium severity | ||||||
AP4 | High severity | ||||||
AQ | Lightning | ||||||
AQ1 | Negligible | Normal | |||||
AQ2 | Indirect exposure | ||||||
AQ3 | Direct exposure | ||||||
AR | Movement of air | ||||||
AR1 | Low | Normal | |||||
AR2 | Medium | ||||||
AR3 | High | ||||||
AS | Wind | ||||||
AS1 | Low | Normal | |||||
AS2 | Medium | ||||||
AS3 | High | ||||||
B - Utilization | |||||||
BA | Capability of persons | ||||||
BA1 | Ordinary | Normal | |||||
BA2 | Children | ||||||
BA3 | Handicapped | ||||||
BA4 | Instructed | ||||||
BA5 | Skilled | ||||||
BB | Electrical resistance of human body (under consideration) | ||||||
BC | Contact of persons with earth potential | ||||||
BC1 | None | Class of equipment according to IEC61140 | |||||
BC2 | Low | ||||||
BC3 | Frequent | ||||||
BC4 | Continuous | ||||||
BD | Condition of evacuation in case of emergency | ||||||
BD1 | Low density / easy exit | Normal | |||||
BD2 | Low density / difficult exit | ||||||
BD3 | High density / easy exit | ||||||
BD4 | High density / difficult exit | ||||||
BE | Nature of processed or stored materials | ||||||
BE1 | No significant risks | Normal | |||||
BE2 | Fire risks | ||||||
BE3 | Explosion risks | ||||||
BE4 | Contamination risks | ||||||
C - Construction of building | |||||||
CA | Construction materials | ||||||
CA1 | Non combustible | Normal | |||||
CA2 | Combustible | ||||||
CB | Building design | ||||||
CB1 | Negligible risks | Normal | |||||
CB2 | Propagation of fire | ||||||
CB3 | Movement | ||||||
CB4 | Flexible or unstable |