Residential electrical installation: Difference between revisions

From Electrical Installation Guide
Home > Residential premises and other special locations > Residential electrical installation
(update_2018)
(converted syntax for Manual Tocs)
Line 19: Line 19:
Always refer to your local regulations and standards for the mandatory requirements applicable for residential or similar premises.
Always refer to your local regulations and standards for the mandatory requirements applicable for residential or similar premises.


{{Manual_TOC |
{{Section-TOC}}
* [[Residential electrical installation - The power network|The power network]]
* [[Residential electrical installation - Distribution boards components|Distribution boards components]]
* [[Residential electrical installation - Protection of people|Protection of people]]
* [[Residential electrical installation - Circuits|Circuits]]
* [[Residential electrical installation - Protection against overvoltages and lightning|Protection against overvoltages and lightning]]
* [[Residential electrical installation - Periodic control|Periodic control]]
* [[Residential electrical installation - Requirements and recommendations for Kitchen|Requirements and recommendations for Kitchen]]
* [[Residential electrical installation - Requirements and recommendations for Living room|Requirements and recommendations for Living room]]
}}


[[ru:Электроустановка жилых помещений и коттеджей]]
[[ru:Электроустановка жилых помещений и коттеджей]]
[[zh:住宅电气安装]]
[[zh:住宅电气安装]]

Revision as of 13:59, 20 December 2019


Electrical installations for residential premises need a high standard of safety and reliability

The international standard reference for electrical installation in buildings is the IEC 60364 series “Low-voltage electrical installations”, and its European equivalent, the HD 60364. But these standards are general, applicable to all types of premises, and do not provide simplified and ready-to-use rules for residential premises.

Some of the standards from part 7 of the IEC 60364 address residential premises, such as the IEC 60364-7-701 “Requirements for special installations or locations – Locations containing a bath or shower”, which provides mandatory additional safety measures for bathrooms (see Bathroom electrical installation).

In practice, most countries have national regulations or standards governing the rules to be strictly observed in the design and realization of electrical installations for residential and similar premises. But these national standards are not harmonized internationally, and may range from very basic requirements to advanced requirements for safety and comfort.

Some of these national regulations and standards also include elements which are not covered or required by the IEC 60364 series:

  • additional requirements for safety, like protection against fire risks with smoke detectors, or with the mandatory installation of AFDD (Arc Fault Detection Devices) in bedrooms ...
  • requirements for (minimum) comfort, like minimum equipment per type of rooms (socket outlets ...)

Finally, additional requirements are needed to cover new "usages", like Electric Vehicle charging, photovoltaic installations …

Therefore, the content of this section is an overview of the main requirements or recommendations for residential premises, from an international point of view, based on some advanced local standards from countries like France, Italy, Germany, Spain …

Always refer to your local regulations and standards for the mandatory requirements applicable for residential or similar premises.

ru:Электроустановка жилых помещений и коттеджей zh:住宅电气安装

Share